TB-100 Marking Machine
TB-100 Automatic Sleeve and Shrinkable Labeling Machine Technical Parameter:
1. Main equipment dimension: 1000L * 1200W * 1800H (mm).
2. Weight: about 500 KG.
3. Available bottles diameter: ψ25 ~ ψ125 (mm).
4. Bottle height: 15 ~ 320 (mm).
5. Applicable bottle type: Round, oval, square, abnormity bottles, the mouth of the bottle.
6. Labels Length: 35-200 mm. (Max).
7. Label width: 0.035 ~ 0.08 mm.
8. Tube diameter: 3-10 " applicable  
9. Speed: not less than 100 bottles / minute (in normal operation)
10. Voltage: AC 3 ψ380 V.
11. Power consumption: 2 KW.
12. When the bottle shape or size is different, just replace the subcentres bottle screw.

Machine Collocation:
1. Stainless steel main equipment: operator can operate it much more easily and safely; the whole machine is waterproof and no rust.
2. Adjustable disk: original creation convoluting cut, double-edged, and the longest service life
3. Single- orientation centre: it has good stabilization when conveying the labels.  
4. Synchronization bottle disparting system: no shaking
5. Brushing the label: Good precisions
6. Label-controlling frame: combine the original creation empennage with the electric frame. And it has good precision

Electric Collocation:
1. PLC programmable controller.
2. Stepper motor.
3. Stepper drivers.
4. Transducer.
5. Sensor.TB-250
Beeline Type Shrink Marking Machine

Characteristics:
• High efficient and stable production capacity: 250 standard bottles per minute
• High stability of the mechanical structure: Stainless steel and aluminum alloy rigid frame, it is steady and no rust
• Applicable bottle type: Round bottle, oval bottle and the mouth of the bottle
• Unique synchronization cutter, in the scope of specifications no need to replace the cutter. For the replacement: finish it in two minutes
• A wide range of applications: Food, beverages, cleaning supplies, medicines, bottles, and many other plastic bottles, glass bottles, PVC, PET, PS, can and containers.
• High-quality orientation precision: Mechanical drive design and this machine adopted forcing mark-type. Over than 0.035 MM membrane thickness is applicable, it is adjustable in the range of from 5 ' to 10 ' membrane diameter  
• Low consumption: Use the low cost blade
• Reliable after-sales service: all kinds of spare parts are available anytime,. And many experienced technicians are ready to provide technical support for you.
• Beautiful modeling, solid structures and very flexible
• Exclusively designed reciprocating cutter and adopt rigid composition and move smoothly, with long service life of the blade
• Centre-pole orientation mode, easy to replace, control and operate
• It have good quality
• The structural elements are simple and useful
• With security frame and good design

Specification:

Introduction of Constitution

1. Fiber electronic detector
Original creation of the electronic detector with a good precision.

2. Synchronization and adjustable cutter Block:
Replacement of the blade: According to the bottle diameter: (1) 25-50 mm (2) 50-95 mm (3) 95-125 mm
In this specifications, you don’t need to replace the cutter block, just replace the blade, and replace the blade is very easy, fast, convenience and safe.

3. Positioning system with bottles:
Special positioning belt from top to bottom, and operated by control panel, it has high precision, easy controlling, and also has a good stability.

4. Heat Shrink Equipment:
Adopt temperature-microcomputer control, save time and power and it has a high thermal efficiency. The outside of machine is covered with fiber glass, so it is safe to use. This equipment has two kinds of shrink mode: smoke mode and galvanothermy mode.

Bottle Top Marking Machine

Features:
• Leading technology: Synchronized stepper motor controlling with linked cutter, it has long service life, and high precision.
• Stainless steel main machine: allows the operator to have more security, and the whole equipment is waterproof and no-rust.
• Single-orientation center pole: ensure stability of sending label.
• Control box: easy to control.
• Label-controlling frame: combine the original creation empennage with the electric frame. And it has good precision.
Specification:

Model	Bottle Top Marking Machine
Main equipment dimension (L x W x H)	1060 x 800 x 2130 mm
Weight	100KG
Main equipment voltage	220V
Main equipment power	12KW/H
Label length	20-300 mm
Bottle dia.	20- 100 mm
Speed	20-100
Material	PVC,PET,OPS,OPP
Shape	Rotundity
Thickness	0.03~0.08 mm